GFW51573-1SC StillStatic ID.BUZZ H&R Deep Coilover Suspension - Lowering 40-80mm +

Availability:

As usual H&R engineers have created the perfect H&R Monotube coilover suspension to the new ID. Buzz, When lowered the E-VW looks even more stylish. Added to this are reduced body movements and more direct turn-in behaviour, the result of the lowered centre of gravity 40mm for normal versions and 80mm for deep versions. Thanks to the precise fine-tuning of the suspension elements of the H&R dampers and combined H&R progressive springs, ride comfort remains suitable for long journeys and the payload remains at standard level. So nothing stands in the way of increased driving pleasure!

H&R deep coilovers for the ID.Buzz are the official low version utilising a shorter body and specific deep springs made by H&R and exclusively available at StillStatic in the uk.

These versions giving additional lowering range 40-80mm +

( Normal version Front 45-55mm / Rear 35-50mm Lower )

These are suitable for all 2wd models please contact us about 4 motion GTX models.

Modifications to headlights and clearances maybe needed depending on the wheel and tyre combination used. 

Please contact us if you would like to know more on mounting this suspension kit or check our socials for images ofr the ID Buzz on Deep Coilovers @stillstatic.

Suspension is held in stock in the uk for fast delivery of 2-3 working days.

The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited

After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.

If necessary, the vehicle ride height must be adjusted higher or be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).

StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.